Removal Procedure
- Block the vehicle wheels.
- Put the shift lever into neutral (N).
- Remove the console trim plate.
- Insert your fingers (if necessary, use a flat plastic tool) between the trim plate and the PRNDL at the RH rear corner of the chrome trim (2).
- Gently lift up the trim plate in order to disengage the RH rear corner retainer (3).
- Use the same method at the LH rear corner and the two front corners of the chrome trim in order to disengage the remaining retainers.
- Lift the console trim plate assembly upwards from the rear edge and pull the assembly rearward.
- Disconnect the electrical connectors as necessary.
IMPORTANT:
Do not use the convenience door opening as a leverage point.
NOTE:
To prevent component damage, DO NOT use metal tools to remove the trim.