LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Knee Bolster Fasteners & Trim Panel
    GM105514Courtesy of GENERAL MOTORS CORP.
  1. Align the knee bolster trim panel (1) retainers with the lower IP.
  2. Push the panel upward firmly in order to snap the bolster into the retainer bracket.
  3. Install the knee bolster fasteners (2).
  4. Install the driver's side sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (LHD)  or Closeout/Insulator Panel Replacement - Left (RHD)  or Closeout/Insulator Panel Replacement - Right (LHD)  or Closeout/Insulator Panel Replacement - Right (RHD) .
scientia non olet · About LEMON Manuals