Removal Procedure
- Open the I/P storage compartment door.
- Remove the Audio Visual (A/V) adapter from the instrument panel (I/P) storage compartment, if equipped. Refer to Audio/Video Wiring Harness Replacement in Navigation Systems.
- Remove the I/P compartment lamp. Refer to Instrument Panel (I/P) Storage Compartment Lamp Replacement in Lighting Systems.
- Lift the I/P storage compartment door slightly and twist the compensator rod 1/4 turn in order to disengage the end of the compensator rod from the I/P storage compartment door.
- Remove the screws (1) from the I/P storage compartment bin.
- Partially remove the I/P storage compartment from the I/P assembly.
- Disconnect the electrical connectors and guide the I/P storage compartment lamp lens/connector out of the opening in the I/P storage compartment.
- Remove the I/P storage compartment.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.