LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Compartment Replacement - Instrument Panel (I/P) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying I/P Storage Compartment Bin Screws
    GM287688Courtesy of GENERAL MOTORS CORP.
  1. When installing a new I/P storage compartment the original lock cylinder will need to transferred to the new I/P storage compartment. Refer to Lock Cylinder Replacement - Instrument Panel (I/P) Compartment Door .
  2. Partially install the I/P storage compartment to the I/P.
  3. Connect the electrical connections and guide the I/P storage compartment lamp through the opening in the I/P storage compartment.
  4. Install the I/P storage compartment to the I/P.
  5. Install the I/P compartment lamp. Refer to Instrument Panel (I/P) Storage Compartment Lamp Replacement in Lighting Systems.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the screws (1) that retain the I/P compartment to the I/P.

    Tighten:  Tighten the screws to 1.5 N.m (14 lb in).

  7. Install the A/V adapter, if equipped. Refer to Audio/Video Wiring Harness Replacement in Navigation Systems.
    8. Fig 2: View of Compensator Rod
    GM287692Courtesy of GENERAL MOTORS CORP.
  8. Lift the I/P storage compartment door in order to install the compensator rod to the I/P compartment door.

    Twist the compensator rod 1/4 turn, in order to secure the compensator rod to the door.

  9. Inspect the I/P storage compartment for proper operation.
scientia non olet · About LEMON Manuals