LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Engine Mechanical (Repair Instructions -- 2 Of 3) -- 4.8L, 5.3L & 6.0L) >> Repair Instructions (Off-Vehicle - Part 2) >> Coolant Air Bleed Pipe Removal

Coolant Air Bleed Pipe Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine coolant air bleed pipe bolts (309).
  2. Remove the pipe (307) with hose and gaskets (308).
    3. Fig 1: View Of Engine Coolant Air Bleed Pipe, Bolt & Gasket
    GM1277099Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine coolant air bleed cover bolts (312), covers (313), and gaskets (308).
    4. Fig 2: View Of Engine Coolant Air Bleed Cover, Gasket & Bolts
    GM1272806Courtesy of GENERAL MOTORS CORP.
  4. Remove the gaskets from the pipe and covers.
  5. Discard the gaskets.
    6. Fig 3: View Of Air Bleed Pipe Sealing Gasket
    GM64262Courtesy of GENERAL MOTORS CORP.
  6. Remove the hose (311) and clamps (310) from the pipe (307).
    7. Fig 4: View Of Engine Coolant Air Bleed Pipe, Hose & Clamps
    GM1277104Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals