LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Escalade ESV >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (Repair Instructions -- 1 Of 3) -- 4.8L, 5.3L & 6.0L >> Repair Instructions (On-Vehicle & Off-Vehicle - Part 1) >> Off-Vehicle Repair Instructions - Part 1 >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

  1. Remove the oil level indicator from the tube.
  2. Remove the oil level indicator tube bolt.
  3. Remove the oil level indicator tube from the engine block.
    4. IMPORTANT: Inspect the O-ring seal for cuts or damage. The O-ring seal may be used again if it is not cut or damaged.
  4. Remove the O-ring seal from the tube, if required.
    5. Fig 1: View Of Oil Level Indicator, Tube & Tube Bolt
    GM260114Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals