LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> DeVille Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

  1. Engage the lower edge of the IP cluster trim plate (1) to the IP.
    2. Fig 1: View Of IP Cluster Trim Panel
    GM517251Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors to the DIC switches.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the IP cluster trim panel (1) screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    4. Fig 2: View Of Cluster Trim Panel Screw
    GM800704Courtesy of GENERAL MOTORS CORP.
  4. Install the screw securing the IP cluster bezel to the passenger trim panel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Install the Upper Trim Pad Trim Pad Replacement - Instrument Panel (I/P) Upper (Standard Models)  or Trim Pad Replacement - Instrument Panel (I/P) Upper (WC2/WC8) 
scientia non olet · About LEMON Manuals