LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> DeVille Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Installation Procedure

Installation Procedure

  1. Place the forward edge of the closeout / insulator panel on the shelf above the carpeting at the front of the vehicle.
  2. Align the insulator with the fastener holes on the insulator panel.
  3. Install the push pin type retainers in order to hold the insulator panel in position.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the threaded fasteners (1).

    Tighten:  Tighten the fasteners (1) to 2 N.m (18 lb in).

    5. Fig 1: View Of Insulator Panel Fasteners
    GM105524Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals