Cruise Control Indicator Inoperative

Step	Action	Yes	No
Schematic Reference Cruise Control Schematics
1	Did you perform the Cruise Control Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Cruise Control
2	Turn OFF the ignition. Turn ON the ignition, with the engine OFF. Observe the CRUISE indicator on the instrument cluster (IPC) during the bulb check. Does the suspect indicator illuminate during the bulb check and then turn OFF?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Replace the instrument cluster (IPC). Refer to Instrument Panel Cluster (IPC) Replacement in Instrument, Gage and Control Panel. Did you complete the repair?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2