LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Concentric Actuator Cylinder Replacement (CTS-V) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the concentric actuator cylinder to the vehicle.
  2. Install the concentric actuator cylinder connector to the vehicle hydraulic line.
    3. Fig 1: Installing Clip To Hydraulic Line Connection
    GM1447467Courtesy of GENERAL MOTORS CORP.
  3. Force the line connection together while installing the clip to the hydraulic line connection.
  4. Carefully pull the lines apart to ensure there is a proper connection.
    5. Fig 2: Installing Transmission
    GM1426234Courtesy of GENERAL MOTORS CORP.
  5. Install the transmission. Refer to Transmission Replacement in Manual Transmission - Tremec 6-Speed.
  6. Bleed the hydraulic clutch system. Refer to Hydraulic Clutch Bleeding (CTS)  and/or Hydraulic Clutch Bleeding (CTS-V) .
scientia non olet · About LEMON Manuals