LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Concentric Actuator Cylinder Replacement (CTS) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Concentric Slave Cylinder
    GM779337Courtesy of GENERAL MOTORS CORP.
  1. Install the O-ring (3).
  2. Install the concentric slave cylinder (2).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the 3 concentric slave cylinder bolts (1) and the quick connect bolt (5).

    Tighten:

    • Tighten the 3 concentric slave cylinder bolts (1) to 20 N.m (15 lb ft).
    • Tighten the quick connect bolt (5) to 10 N.m (89 lb in).
  4. Install the transmission. Refer to Transmission Replacement in Manual Transmission - M35.
scientia non olet · About LEMON Manuals