LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Assembly Replacement (CTS-V) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission. Refer to Transmission Replacement in Manual Transmission - Tremec-6 Speed.
  2. Remove the concentric slave cylinder. Refer to Clutch Concentric Actuator Cylinder Replacement (CTS)  and/or Clutch Concentric Actuator Cylinder Replacement (CTS-V) .
    3. Fig 1: Removing Clutch Housing Bolts/Studs
    GM1413553Courtesy of GENERAL MOTORS CORP.
  3. Remove the clutch housing bolts/studs (2).
  4. Remove the clutch housing (1).
    5. Fig 2: Removing Clutch Pressure Plate And Driven Disc From Dowel Pins On Flywheel
    GM1430042Courtesy of GENERAL MOTORS CORP.
  5. Remove the clutch pressure plate bolts.
  6. Remove the clutch pressure plate (4) and the driven disc (3) from the dowel pins (1) on the flywheel (2).
scientia non olet · About LEMON Manuals