LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Intake Manifold Flange Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
    2. Fig 1: Intake Manifold Flange & Bolts
    GM788790Courtesy of GENERAL MOTORS CORP.
  2. Remove the intake manifold flange bolts (1).
  3. Remove the intake manifold flange (2) from the cylinder heads.
    4. Fig 2: Identifying Ports To The Cylinder Head
    GM159490Courtesy of GENERAL MOTORS CORP.
  4. Mask off the ports to the cylinder heads, in order to prevent foreign objects from entering the engine.
scientia non olet · About LEMON Manuals