LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Engine Oil Pressure Switch Electrical Connector & Engine Oil Pressure Switch
    GM785774Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (2) from the engine oil pressure switch (1).
  2. Remove the engine oil pressure switch (1) from the oil pump.
scientia non olet · About LEMON Manuals