LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Replacement - Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine mount to the vehicle.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the engine mount lower retaining nuts.

    Tighten:  Tighten the nut to 80 N.m (59 lb ft).

    Fig 1: Identifying Frame Mounting Nuts
    GM785352Courtesy of GENERAL MOTORS CORP.
  3. Install the left engine mount bracket. Refer to Engine Mount Bracket Replacement - Left .
  4. Lower the vehicle.