LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Bracket Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the left catalytic converter. Refer to Catalytic Converter Replacement - Left (LA3, LY9)
  3. Install a screw jack with a block of wood under the oil pan for support.
  4. Remove the upper engine mount retaining nut.
    Fig 1: Locating Upper Engine Mount Retaining Nut
    GM785353Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure not to distort or bend the engine mount heat shield.
  5. Remove the left engine mount bracket retaining bolts.
    Fig 2: View Of Left Engine Mount Bracket Retaining Bolts
    GM785355Courtesy of GENERAL MOTORS CORP.
  6. Remove the left engine mount bracket.
scientia non olet · About LEMON Manuals