LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Rotate the drive belt tensioner clockwise to release drive belt tension.
    Fig 1: Identifying Drive Belt Tensioner
    GM764830Courtesy of GENERAL MOTORS CORP.
  2. Slide the drive belt from the water pump pulley.
  3. Allow the drive belt tensioner to return to the relaxed position.
  4. Remove the drive belt from the accessory drive pulleys.
scientia non olet · About LEMON Manuals