LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Crankshaft Front Oil Seal
    GM827310Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the crankshaft front oil seal is fully and evenly seated.
  1. Tap the crankshaft front oil seal into place using the J 35268-A  . See Special Tools and Equipment .
  2. Install the crankshaft drive gear. Refer to Crankshaft Pulley Replacement .
scientia non olet · About LEMON Manuals