LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Balancer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intake air resonator. Refer to Intake Air Resonator Replacement in Engine Controls-2.6L and 3.2L.
  2. Remove the drive belt. Refer to Drive Belt Replacement .
    3. Fig 1: Removing & Installing Crankshaft Balancer
    GM217342Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft balancer bolts.
  4. Remove the crankshaft balancer from the crankshaft sprocket.
scientia non olet · About LEMON Manuals