LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Timing Belt Installation >> Timing Belt Timing Procedure

Timing Belt Timing Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying J 42069-20
    GM345823Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The following steps are the continuation of installing the timing belt and must not be performed as a stand-alone operation.
    It is not uncommon to repeat steps and make several engine revolutions to achieve the proper level of timing belt adjustment.
  1. Apply the J 42069-20 checking gage to camshaft gears 1 and 2.
  2. Inspect the relationship of the marks on the camshaft gears to the marks on the J 42069-20 checking gage. They must match exactly, if not, timing belt adjustment is required.
  3. Continue to the next applicable procedure.
scientia non olet · About LEMON Manuals