LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Manifold Disassemble

Intake Manifold Disassemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing & Installing Wiring Harness & Connectors From Fuel Injectors
    GM815399Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiring harness and the connectors from the fuel injectors.
    2. Fig 2: Removing & Installing Fuel Rail Attaching Bolt Near Fuel Supply-Return Lines
    GM815398Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel rail attaching bolt near the fuel supply-return lines.
    3. Fig 3: Removing & Installing Fuel Rail Attaching Bolts From Intake Manifold
    GM815401Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel rail attaching bolts from the intake manifold.
    4. Fig 4: Removing & Installing Fuel Rail & Fuel Injectors
    GM815402Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel rail and fuel injectors.
    5. Fig 5: Removing & Installing O-Rings From Fuel Injectors
    GM815403Courtesy of GENERAL MOTORS CORP.
  5. Remove and discard the O-rings from the fuel injectors.
scientia non olet · About LEMON Manuals