LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Drive Belt Tensioner Bolts
    GM158553Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt tensioner to the engine.
  2. Install the drive belt tensioner bolts.

    Tighten:  Tighten the drive belt tensioner bolts to 35 N.m (26 lb ft).

scientia non olet · About LEMON Manuals