LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Installation >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 42067  Rear Main Seal Installer. See Special Tools and Equipment .

    Fig 1: Identifying J 42067
    GM159211Courtesy of GENERAL MOTORS CORP.
  1. Coat the lip of the crankshaft rear oil seal with clean engine oil.
  2. Use the J 42067  to install the crankshaft rear oil seal. See Special Tools and Equipment .