LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Balancer Installation

Crankshaft Balancer Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing & Installing Crankshaft Balancer
    GM217342Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the crankshaft balancer.
  2. Install the crankshaft balancer bolts.

    Tighten:  Tighten the crankshaft balancer bolts to 20 N.m (15 lb ft).

scientia non olet · About LEMON Manuals