LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical - 3.2L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Clutch Pilot Bearing Installation

Clutch Pilot Bearing Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Clutch Pilot Bearing
    GM825555Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  1. Install the NEW clutch pilot bearing using a suitable clutch pilot bearing installation tool.
  2. Measure to ensure the proper installation depth obtained (a).

    Specification:  8.75-9.25 mm (0.3445-0.3642 in)

scientia non olet · About LEMON Manuals