LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Controls - 2.6L & 3.2L - Introduction) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the mass air flow (MAF)/intake air temperature (IAT) sensor. Refer to Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement .
  2. Fig 1: View Of Air Cleaner Assembly
    GM785794Courtesy of GENERAL MOTORS CORP.
  3. Remove the 3 bolts securing the air cleaner assembly to the shock tower and upper tie bar.
  4. Remove the air cleaner assembly from the vehicle.