Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0101, P0102, P0103, P0112, P0113, P0117, P0118, P0121, P0122, P0123, P0125, P0221, P0222, P0223, P0443, P0449, P0451, P0452, P0453, P0458, P0459, P0498, P0499, P0500, P0560, P0562, P0563, P2122, P2123, P2127, P2128, P2138 are not set.
- The engine has been running for 17 minutes or the fuel trim is stable.
- The engine is idling.
- The engine is operating in Closed Loop.
- The battery voltage is between 10.5-18 volts.
- The barometric pressure (BARO) is more than 68 kPa.
- The fuel level is between 15-85 percent.
- The intake air temperature (IAT) is between 2-35°C (39-95°F).
- The start-up ECT and IAT are within 9°C (16°F) of each other.
- The fuel tank pressure (FTP) is between -19 and +7.5 mm Hg (-10 and +4 in H2O).
- The vehicle speed sensor (VSS) is 0 km/h (0 mph).