LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission - M35) >> Repair Instructions >> Shift Control Knob/Closeout Boot Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Shift Control Closeout Boot And Knob Assembly
    GM785887Courtesy of GENERAL MOTORS CORP.
  1. Install the shift control closeout boot and knob assembly to the shift lever.
  2. Firmly press down on the shift control knob in order to attach the shift control knob to the shift lever.
    3. Fig 2: Inserting Front Tabs Of Shift Control Closeout Boot Retaining Ring
    GM801327Courtesy of GENERAL MOTORS CORP.
  3. Insert the front tabs of the shift control closeout boot retaining ring to the console.
  4. Press the rear portion of the shift control closeout boot retaining ring down into the console.
  5. Tug lightly to insure the shift control closeout boot retaining ring is securely attached to the console.
scientia non olet · About LEMON Manuals