LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 3.6L (Ly7) (Repair Procedures -- 2 Of 5)) >> Repair Instructions (On-Vehicle Part 2 & Off-Vehicle - Part 1) >> Off-Vehicle Repair Instructions - Part 1 >> Camshaft Position (CMP) Actuator Removal - Right Exhaust

Camshaft Position (CMP) Actuator Removal - Right Exhaust

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Right Exhaust Camshaft Position Actuator
    GM946222Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Torque Reaction Against Timing Drive Chain Notice in Cautions and Notices.
  1. Use an open wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt.
  2. Remove the right exhaust camshaft position actuator bolt.
  3. Remove the right exhaust camshaft position actuator.
scientia non olet · About LEMON Manuals