Cylinder Head - Top View
WARNING: This page is about a different variant/trim than selected.
Cylinder Head - Top View
| Hole | Thread Size | Insert | Drill | Counterbore Tool | Tap | Driver | Drill Depth - Maximum mm (in) | Tap Depth - Maximum mm (in) |
|---|---|---|---|---|---|---|---|---|
| 1-5 | M8 x 1.25 | J 42385-210 | J 42385-206 | J 42385-207 | J 42385-208 | J 42385-209 | 26.5 (1.04) | 19.0 (0.784) |
| 6-9 | M6 x 1.0 | J 42385-205 | J 42385-201 | J 42385-202 | J 42385-203 | J 42385-204 | 20.05 (0.789) | 16.05 (0.632) |
| 10-12 | M8 x 1.25 | J 42385-210 | J 42385-206 | J 42385-207 | J 42385-208 | J 42385-209 | 26.5 (1.04) | 19.0 (0.784) |