LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.7L (LS6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove the oil level indicator.
    Fig 1: View Of Oil Level Indicator
    GM1392837Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: Identifying Oil Level Indicator Tube
    GM1392838Courtesy of GENERAL MOTORS CORP.
  3. Remove the oil level indicator tube bolt.
  4. Remove the oil level indicator tube.
    5. IMPORTANT: Inspect the O-ring seal for cuts or damage. The O-ring seal may be reused if not cut or damaged.
  5. Remove the O-ring from the oil level indicator tube, if required.
scientia non olet · About LEMON Manuals