LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.7L (LS6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Fuel Injector Sight Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the cross vehicle brace. Refer to Brace Replacement - Cross Vehicle in Body Front End.
  2. Lift the sight shield straight up from the engine.
    Fig 1: View Of Fuel Injector Sight Shield
    GM1392497Courtesy of GENERAL MOTORS CORP.
  3. Disengage the sight shield retaining features from the fuel rail.
  4. Remove the sight shield from the engine compartment.