LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.7L (LS6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Fuel Injector Sight Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Injector Sight Shield
    GM1392497Courtesy of GENERAL MOTORS CORP.
  1. Align the sight shield retaining features to the fuel injector rails.
  2. Push the sight shield down ensuring that the retaining features engage with the fuel rail.
  3. Install the cross vehicle brace. Refer to Brace Replacement - Cross Vehicle in Body Front End.
scientia non olet · About LEMON Manuals