LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.7L (LS6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement - Air Conditioning >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of A/C Drive Belt Routing & Crankshaft Balancer
    GM1392172Courtesy of GENERAL MOTORS CORP.
  1. Install the A/C drive belt around the crankshaft balancer.
  2. Install a breaker bar with hex-head socket to the A/C drive belt tensioner bolt.
  3. Rotate the A/C drive belt tensioner clockwise.
  4. Install the A/C drive belt over the A/C compressor pulley and tensioner.
  5. Slowly release tension on the A/C belt tensioner.
  6. Remove the breaker bar and socket from the A/C drive belt tensioner bolt.
  7. Inspect the A/C drive belt for correct alignment.
  8. Install the cooling fan assembly. Refer to Cooling Fan Replacement - Electric (LS6) in Engine Cooling.
  9. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory .
scientia non olet · About LEMON Manuals