LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.7L (LS6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing/Removing Oil Level Indicator Tube In Oil Pan
    GM1199290Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator from the tube.
  2. Remove the oil level indicator tube bolt from the right cylinder head.
  3. Remove the oil level indicator tube from the oil pan.
    4. IMPORTANT: Inspect the O-ring seal for cuts or damage. The O-ring seal may be reused if not cut or damaged.
  4. Remove the O-ring seal from the tube, if required.
scientia non olet · About LEMON Manuals