LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.7L (LS6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Engine Valley Cover Removal

Engine Valley Cover Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Knock Sensor Wire Harness
    GM309859Courtesy of GENERAL MOTORS CORP.
  1. Remove the knock sensor wire harness.
  2. Fig 2: View Of Knock Sensors
    GM309864Courtesy of GENERAL MOTORS CORP.
  3. Remove the knock sensors.
  4. Fig 3: Installing/Removing Valley Cover & Bolts
    GM668798Courtesy of GENERAL MOTORS CORP.
  5. Remove the valley cover bolts.
  6. Remove the valley cover and gasket.
  7. Discard the valley cover gasket.
  8. Fig 4: View Of Knock Sensor Oil Seals & Valley Cover
    GM1272812Courtesy of GENERAL MOTORS CORP.
  9. Remove the knock sensor oil seals (520) from the cover (555).