LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.7L (LS6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Coolant Air Bleed Pipe Removal

Coolant Air Bleed Pipe Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Locating Coolant Air Bleed Pipe & Gaskets
    GM1272804Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine coolant air bleed pipe studs (309).
  2. Remove the pipe (307) and gaskets (308).
    3. Fig 2: View Of Engine Coolant Air Bleed Cover, Gasket & Bolts
    GM1272806Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine coolant air bleed cover bolts (312) and covers (313).
    4. Fig 3: View Of Air Bleed Pipe Sealing Gasket
    GM64262Courtesy of GENERAL MOTORS CORP.
  4. Remove the gaskets from the pipe and covers.
  5. Discard the gaskets.
    6. Fig 4: View Of Coolant Air Bleed Pipe Clamps & Hose
    GM1272809Courtesy of GENERAL MOTORS CORP.
  6. Remove the hose (311) and clamps (310) from the pipe (307).
scientia non olet · About LEMON Manuals