LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 5L40-E (Introduction, Service & Replacement)) >> Repair Instructions >> Transmission Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Transmission Mount And Upper Mounting Bolts
    GM792207Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the transmission mount and upper mounting bolts.

    Tighten:  Tighten the mount bolts to 60 N.m (44 lb ft).

  2. Install the transmission support. Refer to Transmission Support Replacement in Frame and Underbody.
  3. Lower the vehicle.