LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 5L40-E (Introduction, Service & Replacement)) >> Repair Instructions >> Torque Converter Clutch/Cruise Control Release Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
    2. Fig 1: Removing Torque Converter Clutch/Cruise Release Switch
    GM776637Courtesy of GENERAL MOTORS CORP.
  2. Remove the torque converter clutch/cruise release switch (3) by pulling the upper switch out of the retainer.
  3. Disconnect the electrical connector from the torque converter clutch/cruise release switch (3).
scientia non olet · About LEMON Manuals