LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 5L40-E (Introduction, Service & Replacement)) >> Repair Instructions >> Shift Control Linkage Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Removing Nut From Shift Control Linkage Rod
    GM785879Courtesy of GENERAL MOTORS CORP.
  2. Remove the nut from the shift control linkage rod.
  3. Disconnect the shift control linkage rod from the shift control assembly.
    4. Fig 2: Identifying Shift Linkage
    GM785877Courtesy of GENERAL MOTORS CORP.
  4. Remove the manual shift shaft nut.
  5. Remove the shift control linkage from the vehicle.
scientia non olet · About LEMON Manuals