LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 5L40-E (Introduction, Service & Replacement)) >> Repair Instructions >> Auxiliary Automatic Transmission (AT) Oil Cooler Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the auxiliary transmission oil cooler.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the auxiliary transmission oil cooler mounting bolts (1).

    Tighten:  Tighten the bolts to 6.5 N.m (58 lb in).

  3. Connect the auxiliary transmission cooler outlet line.
  4. Connect the auxiliary transmission cooler inlet line.
    5. Fig 1: View Of Auxiliary Automatic Transmission (AT) Oil Cooler
    GM823315Courtesy of GENERAL MOTORS CORP.
  5. Install the front air deflector. Refer to Air Deflector Replacement - Front in Body Front End.
  6. Check the transmission fluid level. Refer to Transmission General Specifications  and/or Fluid Capacity Specifications .
  7. Check the auxiliary transmission oil cooler for leaks.
scientia non olet · About LEMON Manuals