Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: Ignition Coil View

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the ignition coil bolt(s).
Tighten: Tighten the ignition coil bolt(s) to 10 N.m (89 lb in).

Fig 2: View Of Ignition Coil Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Install the ignition coil electrical connector(s).
If necessary, install the upper intake manifold. Refer to Intake Manifold Replacement - Upper in Engine Mechanical - 3.6L (LY7).