LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - 3.6L - Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Canister Vent Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of EVAP Canister Vent Valve
    GM827315Courtesy of GENERAL MOTORS CORP.
  1. Insert the EVAP canister vent valve into the EVAP canister.
  2. Twist the EVAP canister vent valve clockwise into the locked position.
  3. Install the EVAP canister. Refer to Evaporative Emission (EVAP) Canister Replacement .