LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - 3.6L - Introduction) >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
CAUTION: Allow sufficient time for the engine to cool before removing the ECT sensor. A hot engine may cause an excessive coolant loss or a personal injury.
  1. Turn the ignition OFF.
    2. Fig 1: View Of Coolant Temperature Sensor And Electrical Connector
    GM945424Courtesy of GENERAL MOTORS CORP.
  2. Remove the coolant temperature sensor electrical connector.
    3. Fig 2: Removing Coolant Temperature Sensor
    GM1285193Courtesy of GENERAL MOTORS CORP.
  3. Remove the coolant temperature sensor.
scientia non olet · About LEMON Manuals