Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

The engine speed is less than 40 RPM.
The vehicle speed is 0 km/h (0 mph).
The engine coolant temperature (ECT) is between 5-60°C (41-140°F).
The intake air temperature (IAT) is between 5-60°C (41-140°F).
The accelerator pedal position (APP) sensor angle is less than 14.9 percent.
The ignition 1 voltage is more than 10 volts.
DTC P2176 run continuously once the above conditions are met for more than 1 second.