Conditions for Setting the DTC

This DTC set when one of the following conditions occur:

• The ECM detects that the voltage difference between APP sensor 1 and 2 is more than 0.21 volts.
• The ECM detects that the voltage difference between APP sensor 1 and 2 is more than 0.27 volts with a partially pressed pedal.
• The ECM detects that the voltage difference between APP sensor 1 and 2 is more than 1.07 volts with a fully pressed pedal.
• The ECM detects that the APP sensor 1 voltage is more then 1.17 when leaving the idle range and the voltage difference between APP sensor 1 and 2 is more than 0.04.
• The above conditions are met for less than 1 second.