Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0121, P0122, P0123, P0221, P0222, P0223, P0335, P0336, or P0338 are not set.
The engine speed is between 400-7,000 RPM and steady.
The delivered torque signal is more than 10 percent at idle.
The delivered torque signal is between 9-30 percent with the transmission in drive.
The intake air temperature (IAT) is more than -30°C (-22°F).
The fuel level is more than 10 percent.
The torque management is not active.
The antilock brake system/traction control system (ABS/TCS) is not active.
The ECM is not receiving a rough road signal.
The fuel cut-off is not active, including the traction control, the deceleration, the high vehicle speed, and the high engine speed.