Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

No throttle system DTC P0120.
No ISS DTCs P0716 or P0717.
No OSS DTCs P0722 or P0723.
No TCC stuck ON DTC P0742.
No shift solenoid electrical DTCs P0973, P0974, P0976, P0977, P0979, or P0980.
No IMS DTCs P1815, P1820, P1822, P1823, P1825 or P1826.
No engine delivered torque signal DTC P2637.
The engine run time is greater than 5 seconds.
The IMS does not indicate PARK, NEUTRAL or REVERSE.
The transmission fluid temperature is 20-130°C (68-266°F).
The throttle position is 10 percent or more.
The input shaft speed is 200-6,800 RPM.
The output shaft speed is greater than 100 RPM.