LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical - 3.6L (Ly7) (Repair Procedures -- 4 Of 5)) >> Off-Vehicle Repair Instructions - Part 3 >> Thread Repair >> Crankshaft Main Bolt Hole Thread Repair

Crankshaft Main Bolt Hole Thread Repair

WARNING: This page is about a different variant/trim than selected.

Tools Required

Fig 1: Identifying J 42385-700 High Feature Thread Repair Kit
GM1379759Courtesy of GENERAL MOTORS CORP.
IMPORTANT:
  • In order to repair some crankshaft main bolt holes it will be necessary to mount the fixture plate upside down.
  • Do NOT remove the fixture plate prior to installing the insert with the installation driver. The fixture plate remains in position throughout the thread repair process.

The crankshaft main bearing bolt hole thread repair tooling are in the kits J 42385-2000  and J 42385-700  . The crankshaft main bearing bolt hole thread repair components consist of the following:

scientia non olet · About LEMON Manuals