Secondary Camshaft Drive Chain Guide Installation - Right
WARNING: This page is about a different variant/trim than selected.
- Ensure that the right secondary camshaft drive chain guide (1) is being installed.
- Position the right secondary camshaft drive chain guide.
- Install the secondary camshaft drive chain guide bolts.
Tighten: Tighten the secondary camshaft drive chain guide bolts to 23 N.m (17 lb ft).
Fig 1: Identifying Left & Right Secondary Camshaft Drive Chain Guide & Upper Primary Camshaft Drive Chain Guide
NOTE:
Refer to Fastener Notice
in Cautions and Notices.